How to repaint/coat a facade with self-cleaning nanotechnology siloxane products?

INDICATIVE AMOUNT OF MATERIAL PER SQM

1

If there are molds present, apply preventive treatment by using BIOCID solution and let it act for at least 24 hours.

10 SQM/L

2

If it is necessary to completely remove old paints and/or coatings, strip with paint stripper. High-pressure hydroclean, brush or scrape the entire facade to clean it from any flaking or detached paints, removing any traces of dirt or dust. Carry out any necessary plaster and/or filling repairs with materials compatible with the existing ones.

3a

After drying out the repairs, strengthen the surfaces with the application of penetrating water primer PRIMER S properly diluted.

10 - 15 SQM/L
PER COAT

3b

Apply a coat of consolidating primer based on acrylic styrene solvent ISOMUR for particularly flaking, poorly cohesive, or stripped supports.

10 SQM/L

4

If very irregular, skim with universal white fibrous skim coat MINERALCIVIL, let it cure for 10 days. For cured substrate, repeat step 3a.

1.25 KG/SQM
PER MM THICKNESS

5

Application of two coats of siloxane hydro paint with high breathability and water-repellency, self-cleaning and resistant to the formation of molds and algae thanks to applied nanotechnology, NANOTECH SILOX.

6-8 SQM/L
PER COAT

INDICATIVE QUANTITY OF MATERIAL PER SQM

1

If there are molds present, pre-treatment by applying BIOCID solution and leave it to act for at least 24 hours.

10 SQM/L

2

If it is necessary to completely remove old paints and/or coatings, strip with paint stripper. High-pressure wash, brush, or scrape the entire facade to clean it from any flaky or peeling paints, removing any trace of dirt or dust. Make any necessary repairs to plaster and/or putty with materials compatible with existing ones.

3

Once dry, consolidate the surfaces with a high penetration siloxane primer NANOTECH SILOX
PRIMER PIGMENTED properly diluted.

6 - 8 SQM/L
PER COAT

4

If very uneven, smooth with MINERALCIVIL universal white fibrous plaster
and let it season for 10 days.

For aged support, repeat point 3a.

1.25 KG/SQM
PER MM OF THICKNESS

5

Exterior wall coating with nanotechnology-based self-cleaning plaster finish, NANOTECH SILOX COAT,
composed of siloxane/acrylate, nanosilica, light-resistant pigments, micronized inerts, in 120/150 versions, antimold and antialgae biocides for the preservation of the dry film to be applied in one coat with a steel trowel and finished with a plastic trowel.

2.0 - 2.5 KG/SQM. (120)
2.5 - 3.0 KG/SQM. (150)