How to insulate a building with a styrofoam cladding system??

Thermal insulation

The insulating panel will be positioned and fixed (starting at least 1-2 cm above the walking surface) by means of a starting profile  in pre-painted aluminum with drip that will have the function of aligning and containing the slabs perimeter to the support.

L’ anchoring of the insulating panels, laid falsely, will be carried out by applying adhesive mortar such as LAMPOKAPPA R631, P6A, P6A B, G, Alleggerito, Elastocapp, applied in strips along the edges and always in points in the center of the panel (with a bonding surface ≥ 30 # 37) and l’ insertion of suitable anchors, at a rate of 4-8 / m2 (depending on the type of substrate).

The polystyrene panels will be coated on site with a layer of adhesive mortar made with products such as LAMPOKAPPA R631, P6A, P6A B, G, Alleggerito, Elastocapp, LAMPOCIVIL R632 (white leveling coat for universal use with civil finish), in which it will be drowned an alkali-resistant fiberglass net with rectangular meshes 3.80 x 4.14 mm and an area mass > 150 g / m2.

The laying of the reinforcement mesh “ RETE 160-A” it must be carried out between the 1st and 2nd coat of the smoothing layer, providing for the overlapping of the edges of at least 10 cm and 15 cm near the edges, which will be protected with relative edge protectors in pre-painted aluminum or PVC with pre-assembled mesh.