How to protect a facade with water repellent and breathable products?

PROBLEM: to paint a building exposed to atmospheric agents

Paint or coat a building that is very exposed to atmospheric agents or in particularly unfavorable microclimatic conditions. Critical situations: buildings without cornices, eaves, by the sea, industrial areas, in windy areas, structures with humidity? remaining. Are the products based on siloxane resins due to their water repellency and breathability characteristics? answer the questions more? frequent of the designers. They have a’ very high water vapor diffusion, they are resistant to industrial atmospheric aggressions over time, exceptional meteoric protection, resistant to marine cycles. Very low dirt pick-up, resistant to freeze-thaw cycles, UV-resistant / established? of colors.

SOLUTION: siloxanes for smooth plasters

Smooth finishes for smooth or civil plasters

1. Any molds should be treated with BIOCID algaecide and fungicide solution.

2. In case it is necessary to completely remove old paints and / or coatings, paint with SVERNIL.

3. Hydro-wash at high pressure, brush or scrape the entire façade, cleaning it from chalking or peeling paint, removing all traces of dirt or dust.

4. Make any restoration of plaster and / or grouting with materials compatible with existing ones.

5. Apply a coat of ISOMUR pliolite-based fixative solvent based insulation.

6. If the fund è slightly uneven, for a better aesthetic finish, apply a coat of SEVEN smoothing elastosiloxane base coat for exteriors, if very irregular, smooth with LAMPOCIVIL R632 white universal finishing mortar and leave to mature for 10 days.

7. Apply a coat of PRIMER S siloxane primer appropriately diluted over the entire surface and wait 12 hours.

8. Apply with a brush or roller two coats of micro-coating for exteriors, breathable, water-repellent, based on siloxanes, light-resistant pigments, quartz and micronized carbonates, SILOX FINISH.

9. Alternatively, apply SANOFINISH diffusive siloxane, anti-mold and anti-algae finish, or SANOFILL with an anti-mold and anti-alga acrylic filling.

SOLUTION: siloxanes for rustic plasters

Rustic or float finishes for rustic and / or civil plasters

1. Any molds should be treated with BIOCID algaecide and fungicide solution.

2. If it is necessary to completely remove old paints and / or coatings, use the paint remover.

3. Hydro-wash at high pressure, brush or scrape the entire façade, cleaning it from chalking or peeling paint, removing all traces of dirt or dust.

4. Make any restoration of plaster and / or grouting with materials compatible with existing ones.

5. Apply a coat of ISOMUR pliolite-based fixative solvent based insulation.

6. If the fund è very irregular, smooth with LAMPOCIVIL R632 white universal finishing mortar and leave to mature for 10 days.

7. Apply a coat of PRIMER S siloxane primer appropriately diluted over the entire surface and wait 12 hours.

8. Spatula application of microfibrated wall covering for exterior, smoothed, tonachino effect, consisting of siloxane resins in emulsion, pigments, light-resistant, anti-algae and anti-mold additives, silica sand and marble with constant granulometry, SILOX COAT, in the 100 versions / 120/150.

9. Alternatively è You can use the SANO COAT product.