How to decorate an interior with mineral products

CYCLE

QUANTITÀ INDICATIVE OF
MATERIAL PER SQM

1

Completely remove any layers of old paint, clean and remove all traces of dirt and dust, until a homogeneous and uniformly absorbent substrate is obtained.

2a

Carry out any smoothing with a specific breathable skim coat based on RC 618 hydraulic binders in powder form.

1 / 1.2 KG / SQM
PER MM OF THICKNESS

2b

If you want to obtain a surface with a fine civil effect, smooth with PAULINSANA RAS R550 lime-based smoothing compound with low modulus of elasticity for old plasters and wait 10 days.

1.1 KG / SQM
PER MM OF THICKNESS

CYCLE

INDICATIVE QUANTITY OF MATERIAL PER SQM

1

Completely remove any layers of old paint, clean and remove any traces of dirt and dust, until you obtain a homogeneous and evenly absorbent surface.

2a

Smooth any imperfections with specific breathable skim coat based on hydraulic binders RC 618 in powder form.

1.2 KG/SQM
PER MM OF THICKNESS

2b

If you want a fine civil effect surface, skim with PAULINSANA RAS R550 lime skim coat with low elastic modulus anti-shrinkage for old plaster and wait 10 days.

1.1 KG/SQM
PER MM OF THICKNESS

3

Use the specific silicification primer SILK PRIMER before painting.

10 - 15 SQM/L
PER COAT (UNDILUTED)

4

Apply two or more coats of SILK PAINT EXTRA breathable, mineral interior paint based on potassium silicate.

0.12-0.15 KG/SQM PER COAT