How to treat exposed concrete with a transparent finish?

Home - Issues and Solutions - Outdoor Solutions - Trattare un calcestruzzo a vista con finitura trasparente

  • SOLUTION:

    Translate the following sentence into English:

    PERIOD

    INDICATIVE QUANTITY
    OF MATERIAL PER SQ.M.

     

    Prepare the support by completely removing and demolishing with the aid of mechanical or manual means all deteriorated or detaching concrete parts until complete exposure of the reinforcement bars (even the rear part). Hydro-washing and vigorous cleaning of all surfaces with elimination of dust and any inconsistent parts.
     
    RECONSTRUCTION
     
    Evaluation of the condition of the reinforcements with subsequent replacement and/or addition of load-bearing elements in iron. For overhangs greater than 10 cm, adequately reinforce according to the type of intervention.
     1 After careful cleaning of the exposed reinforcement bars (not white), apply a single-component passivating grout LAMPOPRIMER P613.

    50 G/ML

    2

    Rebuild missing volumes with fibrous-reinforced, medium-rapid and rapid setting tixotropic mortar, TENACITE or TENACITE RAPIDA. The product can be applied in a single solution fresh on fresh up to a thickness of 10 cm. It can be smoothed with a steel trowel or finished with a sponge float.

    16 - 17 KG/MQ FOR EACH CM OF THICKNESS

    3a

    For a complete and definitive protection with a "wet" effect of the repaired concrete, apply on all surfaces the transparent hydrophobic filmogenic protective TRANSPARENT SURFACE FACING based on non-yellowing unsaponifiable acrylic resins for the protective treatment of surfaces in concrete. Compliant with EN 1504-2 requirements.

    0.10 - 15 SQ.M./LITER PER COAT. RECOMMENDED 2 OR 3 COATS ON PREVIOUSLY DRIED SURFACE

    3b

    For a complete and definitive hydrophobic protection of the concrete, apply a beading-effect non-filmogenic impregnator, HYDROMUR, based on solvent-vehicle siloxanes for the protective treatment of surfaces in concrete. Compliant with Standard 1504- 2:2005.

    0.10 - 15 SQ.M./LITER PER COAT. RECOMMENDED 2 OR 3 COATS APPLIED FRESH ON FRESH

    You may also be interested in