How to protect wooden objects with covering finishes?

PROBLEM: protect and decorate the wood with covering finishes

The wood, always used più often in the residential building, è an extremely versatile material and d& # 39 effect. E& # 39; for&memorize options; subject to all& # time wear, as well as from the 26- # attack of fungi, insects and moistureà ;. From ciò born l& # 39; need to protect it and preserve it for a long time.

SOLUTION: wood treatment with an opaque finish

The purpose of covering finishes is? that of uniforming the 26-rsquo; appearance of the wood completely hiding the veins and, above all, the defects of the bottom.

Preparation of the fund

The support, if new, must be sanded with fine abrasive paper; if already? varnished must be sanded to remove the layer of enamel or surface paint; if necessary, wash with water and detergents and allow to dry completely. Any small imperfections can then be grouted with wood-dyed LAMPOSTUCCO. Apply in one or two coats if imperfection requires l&rsquo and, after 2-3 hours from the second pass, sand up to coplanarity? of the support.

Remove the sanding residues and apply a coat of NEOSINTE CMT 300. After 24 hours lightly sand with fine abrasive paper, removing any creases and remove the residues.

Opaque finishes

Apply two coats of S1 solvent alkyd enamel spaced 24 hours apart or two coats of SMALTO ALL’ WATER spaced 8-12 hours apart, or two coats of SMALTO URETANICO ALL’ WATER spaced 24 hours apart.

All three enamels are available in glossy and satin versions.